HOME STORE HOURS NEWSLETTER CONTACT US ABOUT US TECHNICAL INFO MECHANICAL INFO BLOG

Help Desk Software

Home > Sequoia > 2007 and Older Sequoia Accessories > Sequoia Exterior Accessories > Sequoia Wheels

Sequoia Wheels

  Part No: PTR20-34070 Price: $205.43
QTY:

TRD 16
Incorporating rugged off-road styling and just the right amount of street flare the TRD branded 16-inch off-road cast alloy wheels help give owners the extra muscle they need for serious off-highway driving adventures.

Note: 16 inch x 8 inch x 1mm offset.

This wheel has a 6 on 5.5 inch (139.7 mm) bolt circle or P.C.D. and the Center Bore is 106mm nominal. This wheel is compatible with OE 20 degree Tire Pressure Sensors (e.g. 42607-06011 TPMS and 04423-0E010 fit kit).

Must Order 1 of each per vehicle:
Tire Pressure Door Jamb Label MDC#00602-35085 for 2007 and earlier Tacoma, OR MDC# 00602-35088 for 2008 & 2009 Tacoma, AND TRD Owner s Manaul Label MDC# 00602-35061 for ALL vehicles.

This wheel is sold complete with a snap-in TRD center cap, 6 piece Lugnut Set consisting of 6 traditional TRD style 12mm Chrome Spline-Drive Conical-Seat Lugnuts with built-in swivel seat washer, and 1 Spline-Drive lugnut Tool per wheel box. Tires are not included DIO but are available through Dealer Tire.

Recommended tire (shown) is the Baja-Proven BFGoodrich All-Terrain T/A LT265/70R16 M+S rated. PPO (code is L7) includes 4 wheels, 4 TPMS as needed, 4 BFG All-Terrain T/A tires (LT265/70R16 M+S), TRD center caps, spline-drive lugnuts, and TRD wheel locks.

TRD logo is laser-etched on top of each individual wheel lock. The wheel locks available for this wheel are PTR27-34061.

Fits:
2000 - 2006 Sequoia
1995 - 2010 Tacoma
1999 - 2006 Tundra



  Part No: PTR27-34060 Price: $31.13
QTY:

12MM TRD CHROME LUG NUTS
This is the traditional TRD Chrome, Spline-Drive, CONICAL-SEAT lugnut with a captured conical swivel washer. It is designed for the standard 12mm x 1.5 OE thread pitch found on almost all Toyota/Scion/Lexus vehicles. This kit is designed for a 6 lug wheel such as the TRD 16 x 8 Off-Road Wheel, P/N PTR20-34004-15. For a vehicle set of 4 (6 lug) wheels you will need to order four of these lugnut sets. For a vehicle set of 4 (4 lug) wheels you will need to order three of these lugnut sets, and you will have two lugnuts left over, etc. e.g. 6 x 3 =18. 18-16 = 2.

Fits:
2000 - 2007 4Runner
2000 - 2007 Sequoia
1995 - 2010 Tacoma
2000 - 2006 Tundra



  Part No: PT276-60070 Price: $49.80
QTY:

WHEEL LOCK - CLEAR CHROME
Wheels can make the vehicle. Keep your wheels where you need them on your car. Available for alloy and steel wheels.

Fits:
2008 - 2011 Land Cruiser
2007 - 2011 Tundra
2008 - 2011 Sequoia
2008 - 2011 LX 570



  Part No: PTR27-34061 Price: $37.35
QTY:

WHEEL LOCK SET
Combining style security and durability the TRD wheel lock set includes four conical seat 12mm puzzle-style wheel locks for use with 18-inch TRD wheels. Made from forged hardened steel they're triple nickel plated for a bright durable finish and each lock features a laser-etched TRD logo. A matching puzzle key is included with the lock set.

Note: Wheel LOCK 12mm Conical-Seat set of 4 with key tool. TRD logo is laser-etched on each individual wheel lock. Designed for the standard 12mm x 1.5 OE thread pitch found on almost all Toyota/Scion/Lexus vehicles. This kit is designed for Conical-Seat TRD Wheels Only. These lug locks are NOT for use with wheels designed for flat seat lug nuts.

Fits:
2000 - 2005 Celica
2000 - 2011 Corolla
2002 - 2010 Matrix
2005 - 2010 Scion tC
2004 - 2006 Scion xA
2004 - 2010 Scion xB
2008 - 2010 Scion xD
2001 - 2007 Sequoia
1995 - 2010 Tacoma
1999 - 2006 Tundra
2007 - 2010 Yaris



  Part No: PTR27-34070 Price: $54.17
QTY:

14MM TRD CHROME LUG NUTS
This is a new larger version of the traditional TRD Chrome, Spline-Drive, CONICAL-SEAT lugnut with a captured conical swivel washer. It is designed for the LARGER 14mm x 1.5 OE thread pitch found only on select vehicles, such as Land Cruiser and LX470.

Note: This kit contains five chrome 14 mm spline-drive lugnuts and 1 spline-drive key tool (enough for only one wheel.) It is designed for a 5 lug wheel such as the TRD 22 x 9 forged aluminum 2007+ Tundra Wheel, P/N PTR38-34070 and/or PTR38-34080. For a vehicle set of 4 (5 lug) wheels you will need to order four of these lugnut sets. These are not for use with wheels designed for flat seat lug nuts.

Fits: 2008 - 2010 Land Cruiser
2008 - 2010 Sequoia
2007 - 2010 Tundra



  Part No: PTR38-34080 Price: $870.26
QTY:

TRD 22 Aluminum Wheel
The TRD-branded, polished 22-inch forged off-road alloy wheels offer drivers a plus-size street performance upgrade, along with the higher strength-to-weight ratio—helping to keep corner weight down—that’s inherent to hot-forged aluminum wheels. Wheels feature Anthracite paint fill in the pocket and hub area and a forged center cap with TRD logo. Note: This wheel replaces or supercedes previous part number PTR38-34070. The wheels are interchangeable, however, this new part number, PTR38-34080, reflects the fact that lugnuts are NO LONGER included in this wheel box.
  • This wheel uses 14 mm TRD chrome spline-drive conical-seat lug nuts (required and sold separately as a vehicle set for DIO) Use Part number PTR27-60080. Must order 1 Owner's Manual Tire Pressure Label, MDC# 00602-35061 from the MDC for each vehicle.
  • FOR TUNDRA: Must also order 1 Tire Pressure Door Jamb Label, MDC# 00602-34080 for each vehicle.
  • FOR SEQUOIA: Must also order 1 Tire Pressure Door Jamb Label, MDC# 00602-0C080 for each vehicle.
  • FOR LAND CRUISER: Must also order 1 Tire Pressure Door Jamb Label, MDC# 00602-60085 for each vehicle.
  • PPO includes Wheels, Tires, Labels, Lug nuts, Wheel Locks, and 20 degree TPMS as needed. ALL OE Styled-Steel Wheels (on Tundras) require TPMS change (42607-0C030 TPMS for 2007 and 42607-0C050 TPMS for 2008+ plus). TPMS Fit Kit 04423-0C170 may also be required. This wheel uses 14 mm TRD chrome spline-drive conical-seat lug nuts (required and sold separately for DIO) and OE 20 degree TPMS valve stems (not included for DIO). Wheel bolt circle is 5 on 150mm P.C.D. Wheel offset is 50 mm versus 60 mm stock offset. Wheel & Tire PPO includes TRD laser-etched wheel locks.
Fits:
2008 - 2010 Land Cruiser
2008 - 2010 Sequoia
2007 - 2010 Tundra

SEE PART NUMBER PTR38-34071 FOR REPLACEMENT CENTER CAP.
This part is on a special order status. A vin number is required when ordering because we have to supply this to Toyota so they will release the part to us.