* Toyota parts and accessories
* Genuine Factory parts at discounted prices.
* Call us for all of your Toyota Parts needs.
* In business for more than 20 years.
* Toyota parts professionals are standing by.
Help Desk Software
> Sequoia Superchargers
SUPERCHARGER HOIST BRACKET
To aid in installation of the 5.7L V8 supercharger, TRD had developed a hoist mounting bracket that bolts directly onto the supercharger housing lid. The bracket is made from stamped steel and plated to prevent rust.
2008 - 2010 Sequoia
2008 - 2010 Tundra
SUPERCHARGER MAIN ASSEMBLY (5.7L V8)
Not yet approved for 2009 model year. This supercharger fit kit is only approved for installation on Gasoline Fueled vehicle applications. No Flex Fuel vehicle applications are approved.
Unique design fully integrated into the engine with the latest generation Eaton Twin Vortices System (TVS) roots-type rotor pack. ---The twin four-lobe rotors feature 160-degree twist improves air-handling, noise, and vibration characteristics - Kit includes: -- High flow fuel injectors, single belt drive, and lower heat range iridium-tip spark plugs. -- Water-to-air intercooler system with a custom low temperature radiator (LTR) -- A new performance air Intake system is included in the kit with a TRD re-useable performance filter, Intake Flow Accelerator and a larger upper air box lid with a filter service gauge. -- 50-State emissions legal.
Power: 504hp @5500rpm up from 381hp stock, Torque: 550lb-ft @4000rpm up from 401lb-ft stock. ALL POWER NUMBERS CERTIFIED TO SAE J1349
Note: Note: This supercharger is only approved for installation on Gasoline Fueled vehicle applications. No Flex Fuel vehicle applications are approved. Vehicle specific fit kits are required : 2007-2008 Tundra = PTR29-34079, 2008 Sequoia = PTR29-0C080, 2009 Tundra = PTR29-34090, 2009 Sequoia = PTR29-0C090, 2010 Tundra = PTR29-34100, 2010 Sequoia = PTR29-0C100 -- Installation time is approximately 9 hours with the first installation likely to take longer. Installation instructions are available on TIS. -- To aid with installation , TRD has developed a hoist mounting bracket that bolts directly onto the supercharger housing lid. The bracket is made from stamped steel and plated to prevent rust (PTR25-34070). -- Engine calibration re-flash is available through TIS using your scan tool or TechStream device. No other special tools or adapters are required.
** Warranty is the same as other TRD powertrain components: 12 months or 12,000 miles or the balance of the 5 year/60,000 mile new car powertrain warranty, whichever is greater, when installed by an authorized Toyota dealer. Superchargers installed by anyone other than an authorized Toyota dealer are warranted for 12 months or 12,000 miles. Specific warranty information is included with the supercharger.
** The TRD supercharger is to be sold only as a dealer installed or over-the-counter option after retail sale of the vehicle. The financing of the supercharger with the purchase of a new vehicle is strictly prohibited.
2008 - 2010 Sequoia
2007 - 2010 Tundra (various trim levels)
Need a Toyota part? Contact ToyotaPart.com Toll Free 800-581-3033
Metro Toyota, 5850 Stadium Drive, Kalamazoo, MI. 49009 - ©2012
SEARCH FOR TOYOTA PARTS
TOYOTA TECHNICAL INFO